S
C
M
YSTEM
ONFIGURATION AND
SHOW DEBUGGING
show debugging
Overview
This command displays information for all debugging options.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show debugging
Default
This command runs all the show debugging commands in alphabetical order.
Mode
User Exec and Privileged Exec
Usage
This command displays all debugging information, similar to the way the
tech-support
authorized service personnel only.
Example
To display all debugging information, use the command:
awplus#
Output
Figure 6-4:
C613-50186-01 Rev B
C
ONITORING
OMMANDS
command displays all show output for use by Allied Telesis
show debugging
Example output from the show debugging command
awplus#show debugging
AAA debugging status:
Authentication debugging is off
Authorization debugging is off
Accounting debugging is off
Antivirus Debugging Status: off
% Error: ATMF is not configured.
BGP debugging status:
BGP debugging is off
BGP nht debugging is off
BGP nsm debugging is off
BGP events debugging is off
BGP keepalives debugging is off
BGP updates debugging is off
BGP fsm debugging is off
BGP filter debugging is off
BGP Route Flap Dampening debugging is off
Firewall Debugging Status: off
Traffic shaping debugging status: off
IGMP Debugging status:
IGMP Decoder debugging is off
IGMP Encoder debugging is off
IGMP Events debugging is off
IGMP FSM debugging is off
IGMP Tree-Info-Base (TIB) debugging is off
DNS Relay debugging status:
debugging is off
IP packet debugging status:
OSPFv3 debugging status:
...
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
show
241