Show Resource - Allied Telesis AR2050V Command Reference Manual

U M C
PDATE ANAGER OMMANDS

SHOW RESOURCE

show resource
Overview Use this command to show information about the resources of features that have
been enabled.
show resource [<resource_name>]
Syntax
Mode Privileged Exec
Examples To show information about the resources of features that have been enabled, use
the following command:
awplus#show resource
Output Figure 5-1:
Table 5-1:
awplus#show resource 
---------------------------------------------------------------------------- 
Resource Name Status
---------------------------------------------------------------------------- 
iprep_et_rules Checking
The parameters in the example output are explained in the following table.
Related update webgui now
Commands
C613-50186-01 Rev B
Parameter Description
<resource_name> Specific resource to show
Example output for the show resource command
Version
1.1
Parameter Description
Resource Name Name of the updatable resource
Status Resource status. There are five types of status: Sleeping, Checking,
Starting, Downloading, Stopping.
Version Current version of the resource
Interval Configured update check interval for the resource
Last Download Time stamp of last resource downloaded
Next Download Time stamp of next download check for the resource
Check
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Last Download 
Interval
Next Download Check 
Wed Dec 31 23:59:00 2013 
4
hours Thu Jan 1 01:00:00 2014
209