How To Use This Manual - Omron ZX-T Operation Manual

PREFACE

How to Use This Manual

Page Format
Linear Output
This function is used to set the output to external devices.
Output Settings (Monitor Focus)
A linear output refers to a measurement result that is converted and
output as a current between 3 and 21 mA or a voltage between -5 and +5 V.
Using the Zero Reset Function
Zero reset is canceled when the monitor focus setting is set. Set the
Changing to T Mode
Set the mode switch to T.
Set the switch to the threshold value to
be set.
Press any Cursor Key.
The first digit of the threshold value displayed on
the sub-display will flash and direct input will be
enabled.
Change the threshold value with the Cursor
Keys.
To cancel the selected setting, use the LEFT
Key to move the cursor to the leftmost digit
and press the LEFT Key again. he display will
return to the current setting.
ZX-T
10
Operation Manual
Keys and Switches
Provides an illustration of the keys or
switches used during the operation.
Procedure and Additional Explanations
Information useful during the operation and reference
pages are provided here with special marks to indicate the
kind of information being provided.
Section Title
Section 5
Detailed Settings
Outline
Provides an outline or gives a
flowchart of the operation de-
scribed under the main heading.
Index Label
Gives the section number and
subject matter.
Function Outline and
Suggestions
Operation
Indicates the operation to be
performed next.
ZX-T
91
Operation Manual
Display Area
Shows the display status after
a step in an operation.
* This page does not actually exist in
this manual.
Main Heading in
a Section
Indicates page contents.
Sub-heading