About This Manual - Omron SYSMAC C200H-IDS01-V1 Operation Manual

About this Manual:

!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
This manual explains the operation of two non-contact information detection
systems: C200H–IDS01–V1 Electromagnetic Inductor ID Sensor Unit and
C200H–ID21 Microwave ID Sensor Unit. Both Units, having long-range sens-
ing capabilities, can read information from or write information to a Data Car-
rier mounted to a moving work piece. Refer to separate manuals for
specifications and operation of the R/W Heads and Data Carriers. The table
below shows a list of manuals available for the V600/V620 FA ID System.
Handheld ID Controller Operation Guide
V600 FA ID System Serial Interface Operation Manual
V600 FA ID System Parallel Interface Operation Manual
FA ID System V620 ID System with Serial Interface System Manual
FA ID System V620 ID System with Parallel Interface System Manual
V600/620 FA ID System Operation Manual
V600 FA ID System R/W Heads and SRAM Data Carriers
Operation Manual
V600 FA ID System R/W Heads and EEPROM Data Carriers
Operation Manual
V600 FA ID System R/W Heads and SRAM Data Carriers Supplement Z98
V600 FA ID System R/W Heads and EEPROM Data Carriers
Supplement
Before operating an ID Sensor Unit, thoroughly familiarize yourself with both
the Unit and this manual.
Section 1 describes the features, components, configuration, and installation
of the ID Sensor systems.
Section 2 describes operation of the ID Sensor Units, and covers switch set-
tings, bit allocation, and communication commands, and introduces the user
program.
Section 3 describes programming and includes example programs that illus-
trate data transfer between the Unit and the CPU. Monitoring functions and
timing considerations are also covered in this section.
Section 4 contains information on maintenance and troubleshooting.
Four Appendices provide information on specifications and standard models,
and also includes an ASCII code list.
Name Catalog no.
Z43
Z44
Z45
Z68
Z69
Z83
Z95
Z96
Z99
ix