Flow Of Use Procedure - Omron FHV7H-C004-H19-MC Hardware Setup Manual

2 Overview of FH series
2-3

Flow of Use Procedure

The following table shows the flow for using the FH.
Procedure
Preparations
↓
Scene Editing
↓↑
2-8
Description
Installation and Wiring
↓
Turning ON Power
↓
Language Selection in Dialog Box (only
when the Sensor Controller is started for
the first time)
↓
Main Window (Layout 0) Display
↓
Camera Adjustments (Display the settings
dialog box for a Camera Image Input proc-
essing item.)
↓
Select Tool - System settings, and then
under Startup setting, set the settings for
Basic, Communication, and Operation
mode.
↓
Click the Data save button, and then select
Function - System restart.
↓
Select Tool - System settings, and then
set the settings for Camera,
Communication and Other.
↓
Click the Data save button.
In the Main Window (layout 0), edit the
measurement flow.
•
Register processing items.
•
Set the properties for each processing
item.
↓
Click the Data save button.
Reference
Section 4 Handling and Installation Envi-
ronment on page 4-1
Section 5 Setup and Wiring on page
5-1
5-1 When turning ON and OFF on page
5-2
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
FH Series Vision System Hardware Setup Manual (Z366-E1)