Table of Contents
Advertisement
Edge Detection Measurement
This method extracts parts with color changes as edges to perform measurement. Edges are found
through color changes in the measurement region.
It finds edges using color changes in the measurement region.
9
Edge Level
Indicates the edge color change level (degree of color difference). This level is adjusted if edges cannot
be accurately detected.
Note
The value 0 to 100 for the edge level indicates the edge intensity.It is not related to color differences in the
●
original image.
For case of measurement using relative position (%) with regards to width of color difference
The edges are detected in the following manner.
1.
Calculate the overall distribution of color difference in the measurement region.
2.
Min. color difference value: 0%; Max. color difference value: 100%
3.
Locations in which there is an edge level color difference are detected as edges.
Edge Position
304
Measurement Mechanism
FZ3 User's Manual
Advertisement
Table of Contents
