Changing Measurement Positions - Omron ZG2 Series User Manual

Changing Measurement Positions

Select whether to output the position of the measurement value as the position in the
height direction (Z coordinate) or as the position in the horizontal direction (X coordinate).
Selection of measurement position is enabled when measuring height and point of
intersection coordinates.
X position
(horizontal direction)
 FUN mode-[MEAS]-[SENS]-[TASK1 to 8]-[CUSTOM]-[POS.]
Setting value
Z POS. (height direction)
X POS. (horizontal direction)
88
Customizing Measurement Conditions
MEAS/MGNIFY
MAGNIFY
PROFILE
YES NO
←→↑↑
SE
MEAS/MGNIFY
1MGNIFY 2RESET
Z position
(height direction)
Description
Outputs the position of the measurement value as the
position in the height direction (Z coordinate). (default value)
Outputs the position of the measurement value as the
position in the horizontal direction (X coordinate).
4
Move to [YES] and press the SET
key.
The profile in the specified area is
displayed magnified.
ZG2 User's Manual