Download  Print this page

Got Devices Available For The Mes Interface Function - Mitsubishi Electric GOT 1000 Series Manual

Graphic operation terminal.
Hide thumbs

Advertisement

3.2 GOT Devices Available for the MES Interface
Function
The following are GOT devices that can be set in the Device tag settings of the MES interface function.
Type
Bit register inside the GOT
GOT bit register
Can be used as a bit device.
Data register inside the GOT
GOT data register
Can be used as a word device.
Special register inside the GOT
GOT special
Stores GOT's internal information, communication status, error information, etc.
register
Can be used as a word device.
Used when making interaction between the MES interface function and the gateway function.
Gateway device
Virtual device for indirectly reading or writing the controller devices that are monitored by another GOT.
Can be used as a word device.
*1
*2
*3
POINT
POINT
POINT
The gateway function setting is required for use of the gateway devices.
For the gateway setting, refer to the following manual.
GOT1000 Series Gateway Functions Manual for GT Works3
3 - 4

3.2 GOT Devices Available for the MES Interface Function

For GB0 to GB63, refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Do not write any value to a write-prohibited GOT special register.
Setting a value to the GOT special register may affect the GOT operation.
For the GOT special register, refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Specify the gateway device in the following format.
(Network No.) - (Station No.) : EG (Device No.)
Network No. : 1 to 239
Station No. : 1 to 64
Device No. : 0 to 32767
Description
Available setting range
*1
GB64 to GB65535
GD0 to GD65535
*2
GS0 to GS1023
1-1: EG0 to 239-64:
*3
EG32767

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT 1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: