1.6.2
Confirming the communication state on the GOT side (For Ethernet
connection)
Confirming the communication state on Windows
(1) When using the Command Prompt of Windows
Execute a Ping command at the Command Prompt of Windows
(a) When normal communication
C:\>Ping 192.168.3.18
Reply from 192.168.3.18: bytes=32 time<1ms TTL=64
(b) When abnormal communication
C:\>Ping 192.168.3.18
Request timed out.
(2) When using the [Connection Test] of GT Designer3
Select [Communication]
(1) When abnormal communication
At abnormal communication, check the followings and execute the Ping command or [Connection Test] again.
• Mounting condition of Ethernet communication unit
• Cable connecting condition
• Confirmation of [Communication Settings]
• IP address of GOT specified by Ping command
1 - 30
1. PREPARATORY PROCEDURES FOR MONITORING
1.6 Checking for Normal Monitoring
[Communication settings] from the menu to display [TEST].
1.
2.
3.
®
, GT Designer3
®
®
.
1.
Set the [PC side I/F] to the [Ethernet].
2.
Specify the [GOT IP Address] of the
[Communication Configuration] and click the
[Test] button.
3.
Check if GT Designer3 has been connected to
the GOT.