Figure 14: At-Gs950/10Ps Sfp Status Leds; Figure 15: At-Gs950/16Ps Sfp Status Leds; Figure 16: At-Gs950/28Ps Sfp Status Leds - Allied Telesis AT-GS950/28PS Installation Manual

SFP LEDs
The SFP LEDs indicate the Link/Activity and Speed status of each SFP
slot.
The AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/28PS switches
have the SFP LEDs on the front panel. See Figure 14, Figure 15, and
Figure 16.
Note
All of the port LEDs are off when the switch is operating in the low
power mode. To toggle on the LEDs, use the eco-Friendly button.
See "eco-Friendly Button" on page 36 for more information.
Figure 14. AT-GS950/10PS SFP Status LEDs
Figure 15. AT-GS950/16PS SFP Status LEDs
Figure 16. AT-GS950/28PS SFP Status LEDs
GS950/PS Series Switches Installation Guide
SFP LEDs
SFP LEDs
SFP LEDs
31