Chapter 7: Displaying The Hardware Status And Alliedware Plus Version Number - Allied Telesis x330 Series Installation Manual

Chapter 7
Displaying the Hardware Status and
AlliedWare Plus Version Number
The procedures in this section explain how to perform local management
sessions on the switches to verify their hardware status and display the
version numbers of the AlliedWare Plus management software. Allied
Telesis recommends performing these procedures on each switch
individually before building the stack. Here are the procedures:
"Powering On the Switch" on page 100

"Starting a Local Management Session" on page 102

"Displaying the Hardware Status and AlliedWare Plus Version Number"

on page 105
99