Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1707

Policy Server Commands
Defaults
parameter
admin
port_number
preference
ssl | no ssl
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you change the port number, another entry is added to the policy server table; an existing port number is
not changed. To remove a port number, use the no form of this command with the relevant policy server
IP address and the port number you want to remove.
Examples
-> policy server 222.22.22.2 port 345 user dirmgr password secret88 searchbase
ou=qos,o=company,c=country
Release History
Release 6.6.1; command was introduced.
Related Commands
show policy server
MIB Objects
DIRECTORYSERVERTABLE
directoryServerAddress
directoryServerPort
directoryServerAdminStatus
directoryServerPreference
directoryServerUserId
directoryServerAuthenticationType
directoryServerPassword
directoryServerSearchbase
directoryServerEnableSSL
OmniSwitch 6250 CLI Reference Guide
default
up
389 (SSL disabled)
636 (SSL enabled)
0
no ssl
Displays information about policies downloaded from an LDAP server.
November 2009 page 40-5