Fuel And Fuel Line; Installation Of Outboard Motor (Rigging) - TOHATSU MX 50D2 Service Manual

Service Information
a 5 - 25 mm (0.2 - 1.0 in)
1-18

4) Fuel and Fuel Line

Check that fuel tank contains sufficient amount of pre-
mixed gasoline, fuel line is connected and does not leak.
Supply only unleaded regular octane gasoline
into fuel tank. Use fuel mixed with oil.
Fuel and oil mixing ratio is 50:1. For breaking
period, 25:1 mixture shall be used.

5) Installation of Outboard Motor (Rigging)

Check that outboard motor is fixed on the hull with
installation bolts and nuts securely. Check location of anti-
ventilation plate relative to boat bottom.
Anti-ventilation plate standard position a :
a
CAUTION
Test-run to determine the best installation height.
5 - 25 mm (0.2 - 1.0in) below boat bottom
GB
2st 50D2 2011