H3C s3600 series Command Manual page 1045

display sftp source-ip
Syntax
display sftp source-ip
View
Any view
Parameters
None
Description
Use the display sftp source-ip command to display the source IP address specified for the current
SFTP client.
If you have specified a source interface for the SFTP client, this command displays the IP address of the
source interface; otherwise, this command displays the IP address 0.0.0.0.
Examples
# Display the source IP address for the current SFTP client.
<Sysname> display sftp source-ip
The source IP you specified is 192.168.1.1
exit
Syntax
exit
View
SFTP client view
Parameters
None
Description
Use the exit command to terminate a connection with the remote SFTP server and return to system
view.
This command has the same effect as that of the commands bye and quit.
Examples
# Terminate a connection with the remote SFTP server.
sftp-client> exit
Bye
[Sysname]
1-29