H3C s3600 series Command Manual page 1058

tftp tftp-server source-ip
Syntax
tftp tftp-server source-ip ip-address { get source-file [ dest-file ] | put source-file-url [ dest-file ] }
View
User view
Parameters
tftp-server: IP address or host name of the TFTP server to be connected to, a string of 1 to 20
characters. If the switch belongs to a cluster, the value cluster means to connect to the TFTP server of
the cluster. For the configuration of the TFTP server of a cluster, refer to the Cluster part in this manual.
ip-address: IP address to be set as the source IP address.
get: Specifies to download a file from the TFTP server.
source-file: Name of the file to be downloaded.
dest-file: File name used when a file is downloaded and saved to the switch.
put: Specifies to upload a file to the TFTP server.
source-file-url: Path and name of the file to be uploaded to the TFTP server.
dest-file: File name used when a file is uploaded and saved to a TFTP server.
Description
Use the tftp tftp-server source-ip command to connect to a TFTP server through the specified source
IP address, and perform download or upload operations. If the specified source IP address does not
exist, a prompt appears to show the command fails to be executed.
Examples
# Connect to the remote TFTP server whose IP address is 192.168.8.8 through the source IP address
192.168.0.1, and download the file named 3600.bin from it.
<Sysname> tftp 192.168.8.8 source-ip 192.168.0.1 get 3600.bin
tftp source-interface
Syntax
tftp source-interface interface-type interface-number
undo tftp source-interface
View
System view
Parameters
interface-type interface-number: Source interface that the switch uses every time it connects to the
TFTP server.
2-5