H3C s3600 series Command Manual page 1053

sftp source-ip
Syntax
sftp source-ip ip-address
undo sftp source-ip
View
System view
Parameters
ip-address: Source IP address to be set.
Description
Use the sftp source-ip command to specify a source IP address for the SFTP client. If the specified IP
address is not the IP address of the local device, the system prompts that the configuration fails.
Use the undo sftp source-ip command to remove the specified source IP address. Then the client
accesses the SFTP server with the local device address determined by the system.
Examples
# Specify 192.168.0.1 as the source IP address of the SFTP client.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] sftp source-ip 192.168.0.1
1-37