Configure Fdb Agingtime - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

FDB Commands

configure fdb agingtime

configure fdb agingtime <seconds>

Configures the FDB aging time for dynamic entries.

Syntax Description

300 seconds.

Usage Guidelines

The range is 15 through 1,000,000 seconds.

If the aging time is set to zero, all aging entries in the database are defined as static, nonaging entries.

This means that they do not age out, but non-permanent static entries can be deleted if the switch is

The following command sets the FDB aging time to 3,000 seconds:

configure fdb agingtime 3000

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

Specifies the aging time in seconds. Range is 15 through 1,000,000. A value

of 0 indicates that the entry should never be aged out.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0