Show Inline-Power Info Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Power Over Ethernet Commands

show inline-power info ports

show inline-power info {detail} ports <port_list>
Description
Displays inline power information for the specified ports.
Syntax Description
port_list
Default
N/A.
Usage Guidelines
NOTE
Ports in the denied or faulted state periodically display the searching state as the hardware retests the PD
state.
You can use this command to generate a summary report or a detailed report.
Summary output displays the following inline power information for the specified ports:
State—Displays the port power state:
●
Disabled
■
Searching
■
Delivering
■
Faulted
■
Disconnected
■
Other
■
Denied
■
PD's power class—Displays the class type of the connected PD:
●
"-----": disabled or searching
■
"class0": class 0 device
■
"class1": class 1 device
■
"class2": class 2 device
■
"class3": class 3 device
■
"class4": class 4 device
■
Volts—Displays the measured voltage. A value from 0 to 2 is valid for ports that are in a searching
●
state.
538
Specifies one or more ports.
ExtremeWare XOS 11.5 Command Reference Guide