Set Multiauth Precedence; Clear Multiauth Precedence - Enterasys C3G124-24 Configuration Manual

set multiauth precedence

Example
This example shows how to clear the system authentication mode:
C3(rw)->clear multiauth mode
set multiauth precedence
Use this command to set the system's multiple authentication administrative precedence.
Syntax
set multiauth precedence {[dot1x] [mac] [pwa]}
Parameters
dot1x
mac
pwa
Defaults
Default precedence order is dot1x, pwa, mac.
Mode
Switch command, read-write.
Usage
When a user is successfully authenticated by more than one method at the same time, the
precedence of the authentication methods will determine which RADIUS-returned filter ID will be
processed and result in an applied traffic policy profile.
Example
This example shows how to set precedence for MAC authentication:
C3(rw)->set multiauth precedence mac dot1x

clear multiauth precedence

Use this command to clear the system's multiple authentication administrative precedence to the
default precedence order.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
32-44 Authentication and Authorization Configuration
Sets precedence for 802.1X authentication.
Sets precedence for MAC authentication.
Sets precedence for port web authentication