Show Diffserv Class; Set Class Create - Enterasys D-Series Cli Reference Manual

show diffserv class

show diffserv class
Use this command to display information about Diffserv classes.
Syntax
show diffserv class {summary | detailed classname}
Parameters
summary
detailed classname Displays detailed Diffserv information for a specific class.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display a summary of Diffserv class information. In this case, there
are two classes configured, named "guest" and "admin":
D2(rw)->show diffserv class summary
Class Name
----------------- ------------ -------------------------------
guest
admin

set class create

Use this command to create a new Diffserv class.
Syntax
set diffserv class create {all classname}
Parameters
all
classname
Defaults
None.
Mode
Switch command, read‐write.
10-4 Differentiated Services Configuration
Displays a summary of Diffserv class information.
Class Type
All
All
Specifies that all match conditions must be met before the associated policy
is executed.
Specifies a class name for this new Diffserv class.
Ref Class Name