Mode
Interface configuration: B3
Example
This example shows how to set the maximum IRDP advertisement interval to 1000 seconds on the
VLAN 1 interface:
B3(su)->router(Config)#interface vlan 1
B3(su)->router(Config-if(Vlan 1))#ip irdp maxadvertinterval 1000
ip irdp minadvertinterval
Use this command to set the minimum interval in seconds between IRDP advertisements. The no
form of this command deletes the custom holdtime setting, and resets the minimum
advertisement interval to the default value of three‐fourths of the maxadvertinterval value, which
is equal to 450 seconds.
Syntax
ip irdp minadvertinterval interval
no irdp minadvertinterval
Parameters
interval
Defaults
None.
Mode
Interface configuration: B3(su)‐>router(Config‐if(Vlan 1))#
Example
This example shows how to set the minimum IRDP advertisement interval to 500 seconds on the
VLAN 1 interface:
B3(su)->router(Config)#interface vlan 1
B3(su)->router(Config-if(Vlan 1))#ip irdp minadvertinterval 500
ip irdp holdtime
Use this command to set the length of time in seconds IRDP advertisements are held valid. The no
form of this command resets the hold time to the default value of three times the
maxadvertinterval value, which is equal to 1800 seconds.
Syntax
ip irdp holdtime holdtime
no irdp holdtime
(su)‐>router(Config‐if(Vlan 1))#
Specifies a minimum advertisement interval in seconds. Valid values are
3 to 1800.
ip irdp minadvertinterval
SecureStack B3 Configuration Guide 18-11