Set Logging Local - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.1.12 set logging local

Use this command to configure log messages to the console and a persistent file.
set logging local console {enable | disable} file {enable | disable}
Syntax Description
console enable |
disable
file enable | disable Enables or disables logging to a persistent file.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This command shows how to enable logging to the console and disable logging to a persistent file:
Matrix(rw)->
disable
Enables or disables logging to the console.
set logging local console enable file
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring System Logging
11-21