Clear Cos Port-Resource Irl - Enterasys Matrix 2G4072-52 Configuration Manual

8.3.3.12

clear cos port-resource irl

Use this command to clear one or all Class of Service inbound rate limiting port resource
configurations:
clear cos port-resource irl all | group-type-index resource [unit] [rate] [type]
[syslog] [trap] [disable-port] [violators port-list]
Syntax Description
all |
group-type-index
resource
unit
rate
type
syslog
trap
disable-port
violators port-list
Command Defaults
If no options are specified, all non-default settings will be cleared for the associated
rate limiter.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all inbound rate limiting settings associated with port group 0.1,
resource entry 0:
Matrix(rw)->clear cos port-resource irl 0.1 0
Policy Classification Configuration Command Set
Clears all inbound rate limiting port resource entries or a
specific entry.
Specifies a resource entry to be cleared.
(Optional) Clears the unit of measure setting.
(Optional) Clears the data rate setting.
(Optional) Clears the type of action setting.
(Optional) Clears the Syslog setting.
(Optional) Clears the SNMP trap setting.
(Optional) Clears the disable port setting.
(Optional) Clears the limit violation setting.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring Policy Class of Service (CoS)
8-77