Assigning Ports to Policy Profiles
Purpose
To assign and unassign ports to policy profiles.
Commands
For information about...
set policy port
clear policy port
show policy port
set policy port
Use this command to assign ports to a policy profile.
Syntax
set policy port port-string profile-index
Parameters
port-string
profile-index
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to allow Ethernet ports 5 through 15 in unit 1 to transmit frames
according to policy profile 1:
C3(su)->set policy port ge.1.5-15 1
Note: Refer to the latest firmware Release Notes for this platform for information about policy limits
for this platform.
Specifies the port(s) to add to the policy profile. For a detailed description
of possible port-string values, refer to
on page 11-1.
Specifies the ID of the policy profile (role) to which the port(s) will be
added. This value must match the profile-index value assigned using the
set policy profile command
for a policy profile to be active on the specified port.
Assigning Ports to Policy Profiles
"Port String Syntax Used in the
("set policy
profile" on page 15-3) in order
Enterasys C3 Configuration Guide 15-15
Refer to page...
15-15
15-16
15-16
CLI"