Set Trunk Port - Enterasys Matrix E1 1G694-13 Configuration Manual

Port Configuration
Setting Port Trunking

4.2.10.4 set trunk port

Use this command to add a trunk port to an existing trunk
set trunk port trunk_name port_string
Syntax Description
trunk_name
port_string
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to add Gigabit Ethernet front panel ports 3 through 6 to the "blue" trunk.
Matrix>set trunk port blue ge.0.3-6
Port ge.0.3 added to trunk blue.
Port ge.0.4 added to trunk blue.
Port ge.0.5 added to trunk blue.
Port ge.0.6 added to trunk blue.
4-34 Matrix E1 Series (1G694-13) Configuration Guide
.
Specifies the name of the trunk to which the trunk port
will be added.
Specifies the designation of the port to be added to the
trunk. For a detailed description of possible port_string
values, refer to Section 4.1.2.