Show Lldp; Show Lldp Port Status - Enterasys C3G124-24 Configuration Manual

For information about...
clear lldp
clear lldp port status
clear lldp port trap
clear lldp port med-trap
clear lldp port location-info
clear lldp port network-policy
clear lldp port tx-tlv

show lldp

Use this command to display LLDP configuration information.
Syntax
show lldp
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Example
This example shows how to display LLDP configuration information.
C3(ro)->show lldp
Message Tx Interval
Message Tx Hold Multiplier : 4
Notification Tx Interval
MED Fast Start Count
Tx-Enabled Ports
Rx-Enabled Ports
Trap-Enabled Ports
MED Trap-Enabled Ports

show lldp port status

Use this command to display the LLDP status of one or more ports. The command lists the ports
that are enabled to send and receive LLDP PDUs. Ports are enabled or disabled with the
port status
Syntax
show lldp port status [port-string]
: 30
: 5
: 3
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
command.
Refer to page...
10-31
10-31
10-32
10-32
10-33
10-33
10-34
Enterasys C3 Configuration Guide 10-15
show lldp
set lldp