Cooling; Cooling System; Connection Diagram For Coolant Hoses For Vehicles With Manual Gearbox - Skoda Octavia III 2013 Workshop Manual

19 –

Cooling

1

Cooling system

⇒ "1.1 Connection diagram for coolant hoses for vehicles with
manual gearbox", page 179
⇒ "1.2 Connection diagram for coolant hoses for vehicles with
automatic transmission", page 181
⇒ "1.3 Draining and filling coolant", page 182
⇒ "1.4 Checking cooling system for leaks", page 185
WARNING
Hot steam may escape when the coolant expansion reservoir
is opened. Wear eye protection and protective clothing to avoid
eye injuries and scalding. Cover the cap with a cloth and open
carefully.
Note
When the engine is warm the cooling system is under pres‐
♦
sure. If necessary, release pressure before beginning repair
work.
The hose connections are secured with spring-type clips. In
♦
case of repair, only use spring-type clips ⇒ ETKA - Electronic
Catalogue of Original Parts .
Spring-type clip pliers are recommended for installation of
♦
spring-type clips.
Renew gaskets and seals.
♦
When installing fit the coolant hoses free of stress, without
♦
them touching any other components (pay attention to the
marking on the coolant connection).
The arrows which are on the coolant pipes and the coolant
♦
hose ends must stand opposite to each other.
1.1

Connection diagram for coolant hoses for vehicles with manual gearbox

Note
♦ Blue = large coolant circuit.
Red = small coolant circuit.
♦
Brown = heating circuit.
♦
The arrows point in the coolant flow direction.
♦
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
179
1. Cooling system