Removing And Installing Shift Mechanism With Selector Lever Control Cable; Removing And Installing Shift Mechanism With Selector Lev - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
2.8 Removing and installing shift mecha‐
nism with selector lever control cable
Special tools and workshop equipment required
♦ Removal tool for the inner lining of the door panel -MP8-602/1-
The selector lever control cable was replaced as a separate com‐
ponent part up to production date 05.2009
⇒ "2.1 Summary of components - Gearshift mechanism",
page 97 .
As of production date 06.2009, this is no longer possible. The
selector lever control cable must not be removed (separated) from
the shift mechanism and must be replaced together as one com‐
ponent part ⇒ Electronic Catalogue of Original Parts .
Removing
– Remove handle for shift mechanism:
♦ up to production date 11.2012 (CW 45)
⇒ "2.6.1 Removing and installing handle for shift mechanism
up to 11.2012 (CW 45)", page 112
♦ as of production date 11.2012 (CW 45)
⇒ "2.6.2 Removing and installing handle for shift mechanism
as of 11.2012 (CW 45)", page 114
– Shift selector lever into position P.
– Switch off ignition.
Vehicles Octavia II, Superb II, Yeti, Rapid NH
– Remove ashtray or storage area in front of the shift mecha‐
nism ⇒ Body Work; Rep. gr. 68 .
– Remove the centre console and air guide ⇒ Body Work; Rep.
gr. 68 .
– Pull out the plug connector housing of the plug connection
-A- towards the front.
– Disconnect plug connection -A- from the shift mechanism to
the vehicle wiring harness.
Note
Ignore pos. -B-, -C- and -1-.
♦
As of production date 06.2009 the shift mechanism is
♦
changed, the 4-pin plug connection -B- and the selector lever
lock solenoid - N110- -1- are already located in the shift mech‐
anism
⇒ "2.1.2 Summary of components - Gearshift mechanism as
of 06.2009 - (Octavia II, Superb II, Yeti, Rapid NH)",
page 99 .
Vehicles Fabia II, Roomster
– Remove the centre console ⇒ Body Work; Rep. gr. 68 .
– Remove the noise insulation from the gearshift mechanism.
118
Rep. gr.34 - Controls, housing
.
.