Gx Works2 Functions Available For Mitsubishi Electric Cnc - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)

5.3 GX Works2 Functions Available for Mitsubishi Electric CNC

5.3 GX Works2 Functions Available for Mitsubishi Electric CNC
This chapter lists the GX Works2 functions that this CNC supports. For details of each function, refer to "GX Works2
Operating Manual (Common)", "GX Works2 Operating Manual (Simple Project)" and "GX Works2 Operating Manual
(Structured Project)".
The ◎ mark indicates functions that can be used currently with this CNC.
The functions marked by × are exclusively for MELSEC series, and unavailable for this CNC.
The list of device memory functions is omitted because none of the functions is available for this CNC.
IB-1501614-B 60