M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus
6.16.1.3 Enabled/Disabled State of Menu Keys
The following table describes the conditions upon which menu keys displayed on the environment settings screen are
enabled/disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Comment Display Setting
Ladder Display
GXWorks2 Setting
6.16.1.4 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key/return menu key
Various menu keys
Condition upon which it is enabled/disabled
This is enables when reading the sequence program in the current project.
This is enables when reading the sequence program in the current project.
Enabled in GX Works2 mode.
These transition to the main menu.
This displays the specified screen.
493
Operation
IB-1501614-B