Mitsubishi Electric M800VW Series Manual page 583

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
End of trace -> After displaying results -> Start of trace
The obtained trace results are discarded when the trace start is performed. When a file is written in this state, only the trace
conditions are written to a trace file, because trace results have not been displayed.
When you open the trace result display screen, the results of currently performed trace are displayed.
The file cannot be written after displaying the results because trace is being executed.
After starting NC (On-board)
trace
On-board trace files
Result
display
Displays the previous trace conditions and trace
results before change
Trace read
If you use trace read to import a trace file into the NC, and perform the above-described screen operations to do file write, the
resulting trace file is equivalent to that made through the above-described screen operations.
NC (On-board) trace
On-board trace files
IB-1501614-B
Trace file
(Trace conditions only)
558
External device
GX Developer project
On-board trace files
External device
GX Developer project
On-board trace files