Displaying Storage Area On Gx Works2 - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.5 Common Items

5.5.3.3 Displaying Storage Area on GX Works2

The storage area available for the online functions can be specified as [Target Memory Setting] on each of the operation
screens in GX Works2. Select [Program Memory/Device Memory] when not checking the available space and the number of
steps for execution. When checking the available space in data storage area, select [Memory card(SRAM)]; when checking
the number of steps for execution, select [Standard RAM].
Click [Refresh] to display the available space in the area selected as [Target Memory Setting].
When [Target Memory Setting] is Program Memory/Device Memory:
The available space in storage area for sequence programs is displayed
When [Target Memory Setting] is Memory card (SRAM):
The available space in storage area for data is displayed
This table shows the relationship between the [Target Memory Setting] items and storage areas.
Target memory
Program memory
Device Memory
Memory card (SRAM)
Memory card (Flash)
Memory card (ATA)
Standard RAM
Standard ROM
IB-1501614-B
Meaning in M8V series
Sequence program storage area
(temporary storage (RAM in CNC))
Data storage area
(Storage area (ROM in CNC))
Not used (Not selectable)
Not used (Not selectable)
Check number of steps for execution
Not used (Not selectable)
82
Available space display
Available space:
Available space in storage area for sequence pro-
gram
Available space:
Available space in storage area for data
Not used