M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
(2) When selecting the updating version data, the data is compared to the temporary memory area of NC. If the both areas
have the PLC data with the same name, the checkbox of the data is activated. If the PLC data exists in either of the
areas, the checkbox of the data is deactivated.
NC
Built-in ROM
area
IB-1501614-B
Storage destination of the
updating version data
External device
On-board
Temporary
edit area
memory area
Acquisition destination of
the PLC data in NC
384