M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.10 PLC RUN/STOP Popup Screen
6.13.10.1 Outline
This displays the current PLC state (running or stopped) and enables run and stop control of the PLC. The current status
display on the screen changes depending on whether the PLC is currently running or is stopped.
The PLC RUN/STOP popup screen can be called from several different screens.
6.13.10.2 Screen Display Menus
The PLC RUN/STOP popup screen can be displayed from the following menus.
[NC FILE OPERATION] - [PLC RUN/STOP]
[EXT. FILE OPERATION] - [PLC RUN/STOP]
[LADDER MONITOR] - [PLC RUN/STOP]
[LADDER MONITOR] - [FB INSTANCE MONITOR] - [PLC RUN/STOP]
[LADDER MONITOR] - [SPLIT SCREEN] - [ENTRY DEVICE MONITOR] - [PLC RUN/STOP]
[LADDER MONITOR] - [SPLIT SCREEN] - [ENTRY LADDER MONITOR] - [PLC RUN/STOP]
[DEVICE] - [DEVICE BATCH MONITOR] - [PLC RUN/STOP]
[DEVICE] - [ENTRY DEVICE MONITOR] - [PLC RUN/STOP]
[SAMPLING TRACE] - [TRACE EXECUTION] - [PLC RUN/STOP]
6.13.10.3 Screen Display Items
The following table describes the screen display items for the PLC RUN/STOP popup screen.
Item name
Display state
Current state
This displays the PLC state for the current project.
373
IB-1501614-B