Closing The Delete External File Popup Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus
 To select a project to delete from the list
(1) Press the [LIST] menu key to move the focus to the list. Use the up and down arrow keys to select existing project data.
(2) Press the [INPUT] menu key or the [SELECT] menu key to display the confirm delete message. If [YES] is selected, the
confirm delete message and the delete external file popup screen closes and the data is deleted. If [NO] is selected, the
confirm delete message closes and then the system returns to the delete external file popup screen.
Abnormal operation
This information describes the details of error messages displayed on the delete external project popup screen and the
corrective action thereof.
Error message
The specified project does not exist.
Specify an existing project path/project
name.

6.14.6.8 Closing the Delete External File Popup Screen

Use any of the following methods to close the delete external file popup screen.
Methods to close the screen
Delete the external files.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
Error details
This is displayed when the [SELECT]
menu key is pressed after entering a
path or project name that does not exist.
425
Remedy
Enter the correct path and project name
and then press the [SELECT] menu key
again.
IB-1501614-B