Mitsubishi Electric M800VW Series Manual page 306

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.3 Operation Key List
 Selecting external projects or other data
Directories and project data displayed in the [LIST] can be selected and the contents of directories can be displayed.
Use the [ ↑ ] and [ ↓ ] arrow keys to change selections when lists as in the preceding diagram are displayed. The background
color of selected items is light blue.
Select items marked with
the [INPUT] key or "Select" menu key to display the information within the selected directory.
Select directory icons indicated by ".." and press the [INPUT] key to display information in parent directories.
Items indicated by icon in the name display column project data. Use the [ ↑ ] and [ ↓ ] arrow keys to select data and
then operate the menu keys on the screen to issue the selection.
Enabling and disabling selected parameters
You can enable and disable various parameters. There are two methods used to make these settings.
 Press the menu key with the same name as the parameter to select the parameter if not already selected. Press the same
menu key again to enable (add a check mark to) the parameter. If the parameter is already selected, the parameter is
enabled (check mark is added) when the menu key is pressed. Pressing the menu key when the parameter is enabled dis-
ables (clears the check mark from) the parameter. Continually pressing the same menu key switches between the enabled
and disabled state.
 After selecting the parameter with the Tab key, press the [SP] key to switch between the enabled and disabled state.
icon in the name display column and labeled as [DIRECTORY] in the title column and press
Select the item by Tab key, then press SP key.
281 IB-1501614-B