M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.4.3 Enabled/Disabled State of Menu Keys
The following information describes the conditions upon which menu keys displayed on the file operation screen are enabled/
disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Delete Data
Enabled when PLC data is displayed in the list.
Data Rename
Enabled when PLC data is displayed in the list.
6.13.4.4 Status during Screen Displays
The following table describes the status when displaying the file operation screen.
Item name
This is the default focus position when the screen is displayed.
List
This displays the PLC data stored in the current project.
6.13.4.5 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
List
Add New Data
Delete Data
Rename Data
Close
6.13.4.6 Closing the File Operation Screen
Use any of the following methods to close the file operation screen.
Methods to close the screen
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
IB-1501614-B
Condition upon which it is enabled/disabled
Operation
Refer to "6.13.4.6 Closing the File Operation Screen".
Returns to the screen from where the file operation screen was displayed.
The focus is applied to the list.
The add new data popup screen is displayed.
(Refer to "6.13.5 Add New Data Popup Screen")
This displays the delete data popup screen.
(Refer to "6.13.6 Delete Data Popup Screen")
This displays the rename data popup screen.
(Refer to "6.13.7 Rename Data Popup Screen")
Refer to "6.13.4.6 Closing the File Operation Screen".
358
Operation