Example Of Trace File Write - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Closing the trace file delete screen
Use any of the following methods to close the trace file delete screen.
Methods to close the screen
Execute trace file deletion.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.

6.17.4.13 Example of Trace File Write

Outline
There are following writing patterns for a trace file.
 Write the trace conditions only
 Write the trace conditions and trace results
The writing pattern is determined by the trace file of the NC (on-board) and screen operation.
Initial status
Trace results do not exist and only initialized trace conditions are stored in the initial state NC (On-board). When a file is
written in this state, only the trace conditions are written to a trace file.
NC (On-board)
On-board trace files
After starting a trace
Sampling trace is executed according to the trace conditions, and trace results are created by trace start operations. When a
file is written in this state, only the trace conditions are written to a trace file, because trace results have not been displayed.
NC (On-board)
On-board trace files
IB-1501614-B
Trace file
(Trace conditions only)
Trace file
(Trace conditions only)
556
External device
GX Developer project
On-board trace files
External device
GX Developer project
On-board trace files