Operation Of Key Presses; Deleting External Projects - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus

6.14.6.6 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
List
Path
Project name
Select
Close

6.14.6.7 Deleting External Projects

Normal operation
 To directly input the path and name of the project to delete
(1) Press the [PATH] menu key to move the focus to the path input field. Input the path where the project data is stored.
(*) This operation is not necessary if the read source does not need to be changed.
(2) Press the [PROJECT NAME] menu key to move the focus to the project name input field. Enter the name for the project
data.
(3) Press the [SELECT] menu key to display the confirm delete message. If [YES] is selected, the confirm delete message
and the delete external file popup screen closes and the data is deleted. If [NO] is selected, the confirm delete message
closes and then the system returns to the delete external file popup screen.
IB-1501614-B
Refer to "6.14.6.8 Closing the Delete External File Popup Screen".
This selects the list.
This selects the password input field.
This selects the project name input field.
Refer to "6.14.6.7 Deleting External Projects".
Refer to "6.14.6.8 Closing the Delete External File Popup Screen".
424
Operation