Mitsubishi Electric M800VW Series Manual page 30

M800V/M80V Series PLC Development Manual
2 System Configuration of H/W
2.1 System Configuration
[M800VS/M80V]
Connectors on the operation panel I/O unit
Input: 96 points (X200 to X25F)
output: 64 points (Y200 to Y23F)
Manual pulse
generator
Sensor
Max.8 channels
(X6F8 to X6FF)
It is possible to connect up to three manual pulse generators.
Refer to "1ST HANDLE AXIS SELECTION CODE m (HS11 to 116)" in "PLC Output Signals (Bit Type: Y***)" for the
connection point of the manual pulse generator and the handle No.
Digital signals (DI/DO) can be arbitrarily assigned to PLC devices with the parameters.
Refer to "2.2.2 PLC Device Assignment of Digital Signal (DI/DO)" for details.
Operation panel
I/O unit
RIO3
Control unit
RIO1
RIO2
5
Manual pulse
generator
Remote I/O unit
(Max. 55 stations)
DX***
Max. input: 1664 points (X260 to X2FF, ZR)
Max. output: 1664 points (Y240 to Y2FF, ZR)
Remote I/O unit
(Max. 64 stations)
DX***
Max. input: 2048 points (X000 to X0FF, ZR)
Max. output: 2048 points (Y000 to Y0FF, ZR)
Remote I/O unit
(Max. 64 stations)
DX***
Max. input: 2048 points (X100 to X1FF, ZR)
Max. output: 2048 points (Y100 to Y1FF, ZR)
IB-1501614-B