M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation
To use multiple projects
Procedure
Start
Main
Select the current project.
Main/
Stop the PLC.
Main/External file operation
PLC RUN/STOP
Main/External file operation
Open the program in the
external device into the
on-board.
Select external project
Main/External file operation/
External -> NC
Complete
Operation
Mode 1
Menu button
SELECT PROJECT
EXT. FILE OPERATION
PLC RUN/STOP
STOP EXECUTE
EXT. -> NC
READ
333
Select the current operation project.
Display the PLC RUN/STOP popup
screen.
Stop the PLC.
The select external project popup
screen is displayed.
Select the project data saved in the
external device.
Store the project data stored in the
external device into the temporary
memory area in the NC.
Repeat this procedure until all PLC
data in all projects is stored.
IB-1501614-B