Monitor The Sequence Program - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation

6.11.2.3 Monitor the Sequence Program

The following diagrams illustrate the procedure to monitor sequence programs.
To use only one project
Procedure
Start
Main
Monitor the ladder.
Main/ladder
Test the device.
Device test
Complete
Operation
Screen position Menu button
LADDER
DEVICE TEST
BIT DEVICE
SETTING METHOD
SET
319
Transition to the ladder screen.
The monitor automatically starts.
Display the device test
popup screen.
Select the bit device input field on the
device test popup screen.
<Device input example>
M0
Select the setting method selection
field.
<Selection example>
Forced reverse of the ON/OFF state
Forcibly reverse the ON/OFF state of
M0.
IB-1501614-B