Mitsubishi Electric M800VW Series Manual page 305

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

6 Explanation of Built-in Editing Function (PLC On-board)

6.3 Operation Key List

Setting selection items in lists

Select one item of data from lists containing multiple entries of data. The example used to describe the selection method is a

screen containing UI elements for selecting data from a list.

 Switching between programs or other types of data

Pressing the [SWITCH PROGRAM] menu key displays the name of the programs stored in NC in the list. The currently

displayed data is selected (highlighted). Use the [ ↑ ] and [ ↓ ] arrow keys to change the selected data.

Press the [INPUT] key to issue the selection.

If there are multiple stored programs that cannot be displayed on one screen, a triangle pointing down is displayed under the

final data display on the screen as illustrated in the following diagram. As illustrated in the preceding diagram, use the [↑] and

[ ↓ ] arrow keys to move the selection to the triangle pointing downward and display the next page. Repeat this operation to

move to the last page.

IB-1501614-B