M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.6 PLC Data
6.6.2.4 Number of Files Storable
Storage capacity of PLC data is as follows: The number is the total of all the projects.
Data category
Parameter
Program
PLC Messages
Device comments
Symbolic information (" Number of symbolic in-
formation")
Number of symbolic information
Number of symbolic information differs depending on how to be stored in CNC.
When writing operation to the PLC with GX Works2
Number of symbolic information is 2 when writing method is "High Speed Mode" and 1 when it is "Compatible mode".
The following are the procedures to set writing method of symbolic information.
(1) Select [Tools] - [Options] in GX Works2.
(2) Select "Symbolic Information" on an option screen.
Set on "System information write settings to PLC".
When using "External -> NC" of PLC on-board
Number of symbolic information is 2.
Number of files storable
M80V
M800V
6 pcs
60 pcs
120 pcs
80 pcs
303
Remarks
1 pc for each project
Total number of data
IB-1501614-B