M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus
6.16 Environment Setting Menus
6.16.1 Environment Settings Main Screen
6.16.1.1 Outline
This section describes the various settings for using the PLC On-board.
6.16.1.2 Screen Display Items
The following table describes the screen display items for the environment settings screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
IB-1501614-B
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
492