Mitsubishi Electric M800VW Series Manual page 144

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

5 Peripheral Development Environment (GX Works2)

5.5 Common Items

(10) [Write to PLC] writes only trace settings to the CNC controller; trace results are not written.

(11) When trace data that were executed with labels set as trace target in a simple project (with labels) are read by [Read from

PLC], the labels of the trace target are overwritten by actual devices.

(12) [Trace repeat] cannot be set on GX Works2. When executing [Trace repeat] use built-in editing function.

IB-1501614-B