Gx Works2 Setting Screen; Outline; Screen Display Items; Enabled/Disabled State Of Menu Keys - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus

6.16.4 GX Works2 Setting Screen

6.16.4.1 Outline

Configure GX Works2 mode setting.

6.16.4.2 Screen Display Items

The following table describes the screen display items for the GX Works2 settings screen.
Item name
Connected CNC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
Project language

6.16.4.3 Enabled/Disabled State of Menu Keys

The menu keys displayed on GX Works2 settings screen are always enabled.

6.16.4.4 Status during Screen Displays

The following table describes the status when displaying the GX Works2 settings screen for the first time.
(The details of the configuration made on the GX Works2 settings screen are stored. The screen is displayed with the updated
settings configured previously the next time it is displayed.)
Item name
Project language
IB-1501614-B
This displays the name of the connected CNC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
"English", "Japanese", "Chinese (Simplified)", "Chinese (Traditional)",
and "Korean (Hangul)" are displayed.
This selects [English].
502
Display state
Operation