M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.12 File Password Function
5.12.7.2 Changing File Passwords
Change passwords as follows.
In this example, the password setting file is already stored in the CNC.
Start
Password
setting
Select [Online] ->
[Password/Keyword] ->
[New]
Select password setting
file, input new password
(Select Write Protection or
Read/Write Protection for
Registration Condition)
Input current password
End
(1) Select [Online] - [Password/Keyword] - [New], open the following "Create/Change Password" screen.
(2) Select the data area storing the file password to be changed in [Target Memory] to display the file list. Select a desired file
from the file list, and click [Setting...].
Multiple files can be selected by clicking files while pressing [Ctrl]. The same password can be registered in a batch.
221
IB-1501614-B