Outline; List Of Project; List Of Function - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)

6.1 Outline

6.1 Outline
This chapter describes the PLC (built-in editing function) built into the Mitsubishi Electric CNC M8V Series products.
For the terms used in this section, refer to "1 Definitions of Terms".
When this function is started on the NC system version D0 or later where "smart safety observation function (*1)" is enabled
user safety sequence "SafePLC1" and "SafePLC2" are displayed in the project list on the main screen. Select the project or
the user safety sequence to switch the operation target.
(*1) The function to achieve high safety on M800V series. For details, refer to "M800/M80 Series Smart safety observation
Specification manual".

6.1.1 List of Project

Projects that can be used with PLC on-board are as follows:
Tool
GX Developer
GX Works2 (*2)(*3)
(*1) Operates as a project without labels.
(*2) Supported only for M800VW series and M80VW series.
(*3) Some functions my be limited. Refer to the precautions of "6.1.2 List of Function" for details.
(*4) Some functions my be limited. Refer to the precautions of "6.9 Precautions when Using a Project with Labels" for details.
(*5) Some functions my be limited. Refer to the precautions of "6.10 Precautions when Using a Structured Project" for
details.

6.1.2 List of Function

The on-board functions and function availability for each operation target are listed as follows.
 For the machine sequence
Function
Ladder monitoring
Monitor
Entry Device Monitor
Entry Ladder Monitor
Register Monitor
Registered Ladder All Delete
Device Test
Current Value Monitor Change-
over
(10/16)
Block Password Disable
FB Instance Monitor
Ladder editing
Edit
Insert Row
Delete Row
Mark
Copy & paste
Edit Ladder
IB-1501614-B
A project that is stored in CNC
Project type
Simple project
Simple project
Structured project (*5)
Purpose of function
This switches to the ladder monitor mode.
This monitors the ladder and the status of any registered devices simul-
taneously.
This monitors the ladder and any registered ladders simultaneously.
This registers desired devices and ladders to the device registration
monitor and the ladder registration monitor.
This deletes all the ladders registered in the entry ladder monitor.
This turns the bit devices on/off and changes the current values of word
devices.
This changes the display of the current device values on the ladder mon-
itor between decimal and hexadecimal.
This disables the block password set in FB.
This displays the FB instance monitor in the circuit.
This changes to the ladder edit mode.
This inserts a blank line at the cursor position.
This deletes the line at the cursor position.
This selects the desired range of ladders.
This copies the ladders in the selected range and pastes these ladders
to the specified position.
This edits ladders.
Provided (*1)
None
Provided (*4)
None
-
254
Label
Operation target
GX Develop-
er project GX Works2
(without la- project
bels)
○ ○
×
○
×
○
×
○
×
○
○ ○
○ ○
×
○
×
○
×
○
×
○
×
○
×
○
×
○
×
○