Basic Operation 2 (Creating Your First Program); Adding New Sequence Programs - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation

6.11.2 Basic Operation 2 (Creating Your First Program)

If the sequence programs are not stored in the NC, follow the sequence of operations as described in the following table to
create your first sequence program.
Procedure
Create a new sequence program
(1)
Edit the sequence program
(2)
Monitor the sequence program
(3)
Project without labels can be created.
A new program can be created and edited only when the operation mode is GX Developer. For setting method of operation
mode, refer to " Operation mode settings".
When the operation mode is GX Works2, create or edit a project with GX Works2, then store to CNC with external device.
Refer to "6.11.5 Basic Operation 5 (Loading Programs Created with GX Developer/GX Works2)" for the operation method of
external device.

6.11.2.1 Adding New Sequence Programs

The following diagrams illustrate the procedure to add new sequence programs.
To use only one project
Procedure
Start
Main
Add sequence program to
the NC.
Main/File operation
Add new data
Main/File operation
Return to the main screen.
Main
Write the added sequence
program to ROM.
Main/NC file operation
ROM write
Complete
Operation
Operation
Screen position Menu button
FILE OPERATION
DATA NEW
DATA NAME
TITLE
ADDITION
NC FILE
ROM WRITE
EXECUTE
315
Transition to the file operation screen.
The add new data popup screen
displays.
Enter the [Data Name] and [Title] for
the sequence program to be added.
Enter the [Data Name] and [Title] for
the sequence program to be added.
Return to the main screen.
Transition to the NC file operation
screen.
The ROM write popup screen displays.
Execute the ROM write operation.
IB-1501614-B